Publicidad
Normas (estándares):
ATEX
6EP1933-2EC41 / 6EP1933-2EC51:
II 3G
Ex nA nC IIC T4 Gc
WARNING: SEPARATE EXPANSION MODULE IN NON-HAZARDOUS AREAS ONLY!
Hazardous Areas: An enclosure / cabinet rated min. IP54 must be provided in the final installation.
The enclosure / cabinet must be in accordance with the requirement of EN 60079-0:2009 and/or EN60079-15:2010
DIP switches shall not be used in operation or while a hazardous area may be present
Only locking USB-cable type (Partno: Y-Con IP20LOCK-104 cable assy Distributor: Yamaichi) shall be used
6EP1935-5PG01:
II 3G
Ex nA IIC T4 Gc
WARNING: SEPARATE EXPANSION MODULE IN NON-HAZARDOUS AREAS ONLY!
Hazardous Areas: An enclosure / cabinet rated min. IP54 must be provided in the final installation.
The enclosure / cabinet must be in accordance with the requirement of EN 60079-0:2009 and/or EN60079-15:2010
Publicado por:
SIMEA PD-PA
Siemens AG Österreich
Siemensstraße 90
A-1210 Wien
© Siemens AG 2015
A5E36658309, 10.2015
Suministro conforme a disponibilidad. Se reserva el derecho a efectuar cambios por motivos
6 de 6
© Siemens AG 2015. All rights reserved.
técnicos.
SITOP UPS 500S
SITOP UPS 501S
Publicidad
