KIKKA BOO UGO Instrucciones De Uso página 5

TO GUARANTEE YOUR CHILD'S SAFETY, PLEASE READ THE INSTRUCTIONS CAREFULLY, FOLLOW THE USE PROCEDURES AND SAVE THESE FOR
FUTURE REFERENCE.
WARNING:
To ensure the infant's security, the use of this product should be carefully read this manual, press this manual used correctly and properly
customs handbook, to safe operation and maintenance of a reference. Infants and young children should have a hand care, is strictly
prohibited in the case of unattended use of the car. This car is not suitable for jogging or on ice.
• Please read the instruction carefully before use and keep it for future reference.
• The car must be assembled by the adults, children are strictly prohibited folding, assembly or disassembly of the car. • Make sure all the
locking devices are locked before using the cart If any part is damaged or missing, the use of the vehicle must be stopped immediately.
• Hand and safety lock can be used normally.
• It is strictly prohibited to use the car as a toy, the child is strictly prohibited for infants and young children.
• In order to prevent accidental drop or fall, use the car to be sure to fasten the safety belt for infants and young children.(the crotch, waist
and shoulder belt)
• In order to prevent the infant injury, adjust the car process should pay attention to the infant's behavior
• You must step on the brake when you park the car.
• Infants can independently and shall cease to be used when you are sitting, sleeping basket.
• The car seat shall be placed in the basket or other types of baby stroller frame.
• This car is designed for 0 to 36 months and weighs no more than 15 kg of infants and young children.
• A cotton pad with a thickness of more than 20mm should not be added in the sleeping bag. objects.
• Basket for maximum loading capacity of 5 kg. If beyond the manufacturer's recommended load in the vehicle stability.
• This car can only take a baby once prohibited other infants,At the same time, take the car.
• Always pay attention to safety when using this car on the stairs or in the elevator.
• When a child rides, the nurse does not leave.
• Prohibit the use of accessories provided by non producers.
1.PARTS: 1. Frame; 2. Seat and shoulder; 3.Carry cot; 4.Car seat; 5.Canopy; 6. Front wheels 7. Rear wheels;
INSTALL STEPS:
2. Frame install: Pull the handle upwards, until you hear a sound clear, „Click" sound, indicating that frame has started in place. (Note:
before assembling. Be sure to check whether there is a defect of parts, screw loosening, sharp edges, etc.. If the existence of the above
circumstances, should immediately stop using.
3. Front/rear wheel install and remove: Insert front wheel core, until you hear a sound clear, „Click" sound, indicating that front wheel has
been installed in place. The rear wheel core insert rear axle tube, until you hear a sound clear, „Click" sound, that rear wheel has been
installed in place.
4. Seat install and remove: Take the seat in accordance with the schematic diagram of the arrow The direction of the direction of the seat
directly both sides, you can remove Chair seat arm rest. Make a plastic part until you hear it clear. „Click", that has been installed in place.
Follow the direction indicated by the arrow. Press the release button on both sides, you can remove handrail. The sun shade is inserted into
the seat of the chair. Make a plastic part until you hear it clear. „Click", that has been of the red area button up, open the rear zipper, you can
remove the help hand.
5. Carrying cot install and removing: Open the inner lining zipper, press the Fig. the direction of the arrow to pull the pull rod into the A B C
D four positions, and then mounted on the lining can. Lying in accordance with the schematic diagram of the arrow Direction of the seat
directly into the frame plastic Fixed position can be. Follow the direction indicated by the arrow. Press the release button on both sides, you
can remove chair.
6. Car seat Install and removing: Install the car seat cloth cover Figure ABC three position xed can be. The car seat is accordance with the
shematic diagram of the arrow of the direction of the seat directly intothe frame Plastic xed position can be. Follow the direction indicated
by the arrow. Press the release button on both sides, you can remove Car seat.
ENGLISH