Taring Weight Display (Tare); Store Weight Value (Hold) - Seca 856 Manual De Instrucciones

Taring weight display (TARE)

The tare function is useful if an additional weight (for example a dish) is to be ignored in
the weighing result. Proceed as follows:
– Activate the tare function whilst the ad-
ditional weight is on the scale by keep-
ing the Hold/Tare key depressed for
some time.
– Wait until the display stops flashing and
0
shows .
You can now perform as many weigh-
ing operations as you like.
– Hold the key down again to deactivate
the Tare function; the scale is then back
in normal weighing mode and the tare
value has been erased.
– The tare value is likewise erased by the
scale being switched off.
Important!
The maximum weight which can be displayed is reduced by the weight of the ob-
jects already placed on the scale.

Store weight value (HOLD)

It is possible to continue displaying the weight value determined after the load has been
removed, before the weight value has been noted:
– Press the Hold/Tare key whilst the load
is on the scale.
"HOLD" appears in the digital display.
The value remains saved in the display
until the hold function is automatically
switched off.
– The HOLD function can be switched off
by pressing the Hold/Tare key again.
0
appears in the display if the scale has
no load on it, otherwise the current
weight. The "HOLD" display vanishes.
Note:
The HOLD function can also be used if the TARE function has been executed beforehand.
Model 856 15
GB