Switching Off The Scale; Taring Weight Display (Tare) - Seca 685 Manual De Instrucciones Y Garantía

Switching off the scale

– To switch off the scale, press the
START key again.

Taring weight display (TARE)

The Tare function is very useful if an additional weight, e.g. that of a wheelchair, is to
be ignored for weighing purposes.
Proceed as follows:
– Press the green Start key.
– First place the additional weight (e.g.
the wheelchair) on the scale and acti-
vate the Tare function by pressing and
holding the HOLD/TARE key.
The display is reset to zero,
in the display until weight is detected to
be stable. Only then is the Tare func-
tion fully activated. The note "NET" ap-
pears.
– Now move the patient and the
wheelchair previously weighed onto
the scale.
The scale determines the weight of the
additional load. You can now perform
as many weighing operations as you li-
ke. Hold the key down again to deacti-
vate the Tare function; the scale is
then back in normal weighing mode
and the tare value has been erased.
– The tare value is likewise erased by
the scale being switched off.
Model 685
0. 0
flashes
35
GB