Sharp XE-A201 Manual De Instrucciones página 11

A201_1 01.11.11 10:20 AM
5.
When not using the take-up spool (using as receipt paper):
• Cut off the excess paper using the edge of the inner cover, and replace
the printer cover. Press the
out of the printer cover.
When using the take-up spool (using as journal paper):
• Insert the end of the paper into the slit in the spool. (Press the
feed more paper if required.)
• Wind the paper two or three turns around the spool shaft.
• Set the spool on the bearing, and press the
slack in the paper.
• Replace the printer cover.
5
Before you can proceed with registration of sales, you must program:
• date
Please refer to the BASIC FUNCTION PROGRAMMING section for details (page 24).
Downloaded from: http://www.usersmanualguide.com/
Page 9
F
key to make sure the paper end comes
If the paper end does not come out, remove the printer cover, and
pass the paper end between the paper cutter and the paper guide
of the printer cover, and replace the cover.
When using a paper roll as journal paper, you must change the
printing style. Refer to "Print Format" in "Various Function
Selection Programming 1" section for changing the printing style.
Programming date, time and VAT/tax
The cash register provides text languages of English, German, French and Spanish. It is preset to
English. If you want to change the language, you must change it before programming. Refer to
"Language selection" in "Various Function Selection Programming 2" section for changing the
language.
• time • VAT/tax
F
key to
F
key to take up excess
9