Sharp XE-A201 Manual De Instrucciones página 47

A201_3 FOR THE MANAGER
Compression print on journal at REG, MGR and VOID modes
• This selection is valid only when "Printing style" (job code 6) is set as "journal printing".
Job code: 67
* Item:
A
B
C
D
E
F
G
H
Rounding up of the unit digit of amount (C)
Rounding down of the unit digit of amount (D)
• Handle C and D as a pair. When you live in Australia, Switzerland, Netherlands or Norway, set as shown on
the table below for the parameters C and D.
The rounding is performed as follows:
In case C = 0: Unit digit of amount < or = Value of D — rounding down
In other cases: Unit digit of amount < or = Value of D — rounding down
Application of rounding (E)
Limit of the least significant digit in entering amount of item (F)
Difference of memory before rounding and after rounding (G)
Limit of the least significant digit in entering amount of payment (H)
• When you live in Australia, Switzerland, Netherlands or Norway, set as shown on the table below for the
parameters E through H.
Australia
Switzerland
Netherlands
Norway
* Applied to payment by cash only. For payment by cheque or credit, set it in "B".
Downloaded from: http://www.usersmanualguide.com/
01.11.11 10:22 AM
Rounding amount printing
Total amount rounding when a transaction
C c
is finalized directly by , or
Rounding up of the unit digit of amount
Rounding down of the unit digit of amount
Application of rounding
Limit of the least significant digit in
entering amount of item
Difference of memory before rounding and
after rounding
Limit on the least significant digit in
entering amount of payment
Value of D < or = Unit digit of amount — rounding to 5
Value of D < Unit digit of amount < Value of C — rounding to 5
Value of C < or = Unit digit of amount — rounding up
CD E
82 Payment*
82 Item & payment
82 Payment
54 Payment
Page 45
Selection:
No*
Yes (for Australian system)
Rounding*
b
key. Not rounding (for Australian system)
Item and payment*
Payment
Arbitrary*
0 only
0 and 5 only
No*
Yes
Arbitrary*
0 only
0 and 5 only
F
Arbitrary
0 and 5 only
Arbitrary
Arbitrary
Entry:
0
1
0
1
0 - 9 (default: 0)
0 - 9 (default: 0)
0
1
0
1
2
0
1
0
1
2
G H
Yes 0 and 5 only
No 0 and 5 only
Yes 0 and 5 only
Yes 0 only
45