Toto TS170T Manual De Instrucciones página 7

7. Confirm that the distance
between the top of the stem
adapter and the escutcheon
is 1-3/8" (35 mm). Adjust this
distance using the stem adjuster.
8. Confirm that the gap between
the escutcheon and handle is
1mm or more.
CAUTION: If the gap is less
than 1 mm gap, it will cause the
handle to scrape the escutcheon
and malfunction.
9. Make sure that the "104" mark
on the handle aligns with the
mark on the cover plate.
10. Install the handle with the screw.
11. Place the cap.
InSTallaTIon PRoCeDURe
Spline
Escutcheon
Longer
Stem
stem
adjuster
Stem key
Handle
Screw
7
Stem adjustor
Holding jig
Shorter
stem
Escutcheon
Handle
1/32"
(1mm)
Mark
Cap