Switching The Weight Display; Automatic Switch-Off/Economy Mode; Taring Weight Display (Tare) - Seca 869 Manual De Instrucciones

Switching the weight display

The weight display can be switched between kilogrammes (kg) and pounds (lb) or
between pounds (lb) and stones (st).
– Switch on the scale using the start key.
Weight is initially displayed in the last
setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/
lbs/sts key.
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The lbs or sts display lights up.

Automatic switch-off/economy mode

The scale automatically detects whether it is being operated on rechargeable/non-
chargeable batteries or whether it is connected to the mains.
– Operation on rechargeable/non-chargeable batteries: automatic shut-down after 20
seconds.
– With mains operation: shut-down only via keypad.

Taring weight display (TARE)

The tare function is very useful, for example for determining the weight of a child or an
object placed on the scale in addition to yourself.
Proceed as follows:
– Press the start key with no load on the
scale.
– First stand on the scales yourself with-
out the additional weight and activate
the Tare function by depressing and
holding the hold/tare key.
The display is reset to zero,
in the display until weight is detected to
be stable. Only then is the Tare function
fully activated. The note "NET" appears.
– Now take the additional load onto the
scale. You can leave the scale to do so,
----
in which case
The scale determines the weight of the
additional load.
You can now perform as many weigh-
ing operations as you like.
Model 869
0. 0
flashes
appears.
19