Correct Weighing; Switching The Weight Display; Switching Off The Device - Seca 763 Manual De Instrucciones Y Garantía

Correct weighing

– Remove load from scales.
– Press the Start button.
,
display in sequence. After this the
scales are automatically set to zero
and ready for operation.
– If necessary, change over the weight
display (see "Switching the weight dis-
play")
– Stand on the scales and remain mo-
tionless.
– Read the weighing result off the digital
display.
– If a weight of more than 250 kg or
550 lbs is placed on the scales, then
appears in the display.
– To switch off the scales, press the
Start button again.

Switching the weight display

The weight display can be switched between kilogrammes (kg) and pounds (lbs) or be-
tween kilogrammes (kg) and stones (sts).
– Switch on the scale using the green
START key. Weight is initially dis-
played in the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the
kg/lbs/sts key.
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
– The lbs or sts display lights up.

Switching off the device

– To switch off the scales, press the Start button again.
Model 763
and appear in the
21