Correct Weighing; Switching The Weight Display; Automatic Switch-Off/Economy Mode - Seca 644 Manual De Instrucciones

Correct weighing

– Press the Start key with no load on the
scale.
SE(a 8. 8 . 8 . 8 . 8 .
, and
tively in the display. The scale is then auto-
matically set to zero and ready to use.
– If necessary, switch the weight display
(see page 26).
– Ask the patient to mount the scale.
Once on the scale, the patient should
stand still.
Note
The maximum load on each individual
corner of the weighing platform is
200 kg.
– Read the weighing result off the digital
display.
– If a load greater than 300 kg or 660 lbs
is placed on the scale,
the display.
– To switch off the scale, press the Start
key again.

Switching the weight display

The weight display can be switched between kilogrammes (kg) and pounds (lbs) or be-
tween kilogrammes (kg) and stones (sts).
– Switch on the scale using the green
Start key. Weight is initially displayed in
the last setting selected.
– To switch the weight display between
kilogrammes and pounds, press the kg/
lbs/sts key.
– The kg or lbs display lights up.
– To switch weight display between
pounds and stones, hold down the
kg/lbs/sts key for approx. 2 seconds.
The lbs or sts display lights up.

Automatic switch-off/economy mode

The scale automatically detects whether it is being operated on rechargeable batteries
alone or whether it is connected to the mains.
– With rechargeable battery operation: automatic shut-down after 5 minutes.
– With mains operation: shut-down only via keypad.
26
0. 0
appear consecu-
St0P
appears in