Delivery Check; Accessories / Spare Parts - Sundstrom SR 100 Instrucciones De Uso

The inhaled air flows through a filter and
inhalation membrane into the mask. The exhaled
air is discharged from the face piece through
two exhalation valves.
The half masks are used either as filtering
devices in combination with filters from the
Sundström range, or in combination with the
SR 307 compressed air attachment which then
serves as a breathing apparatus with continuous
flow for connection to a compressed air supply.
A wide range of accessories are available. See
2.2 Accessories/Spare parts.
1.2 Applications
The Sundström half masks provide respiratory
protection against airborne pollutants, such
as particles, micro-organisms, biochemical
substances, gases/vapours and combinations
of these substances to a user.
1.3 Warnings/Limitations
Note that there can be national differences in
the regulations for use of respiratory protective
equipment.
The equipment must not be used:
• If you cannot make the mask a tight fit during
the fitting test.
• If the pollutants are unknown or lack ad-
equate warning properties.
• In environments that are Immediately Dan-
gerous to Life and Health (IDLH).
• In environments where the ambient air is
oxygen-enriched air or does not have a
normal oxygen content.
• If you find that breathing is difficult.
• If you experience dizziness, nausea or other
discomfort.
• If you smell or taste the pollutants.
• If you have any hair growth between the
skin and facepiece sealing surface such as
stubble, beard growth, beard, moustache, or
sideburns which cross the respirator surface.
• If scars or other physical characteristics may
interfere with a proper fit of the respirator.
Caution must be taken when using the equip-
ment in explosive atmospheres.
2. Parts

2.1 Delivery check

Check that the equipment is complete in ac-
cordance with the packing list, and undamaged.
Packing list
• Half mask
• Pre-filter holder
• Cleaning tissue
• ID-tag
• Pre-filter
• Storage bag
• Instruction of use

2.2 Accessories / Spare parts

Fig. 1
Item Part No.
Half mask SR 100 S/M
Half mask SR 100 M/L
Half mask SR 100 L/XL
Half mask SR 90-3 S/M
Half mask SR 90-3 M/L
1. Mask body
2. Filter attachment
3. Head harness SR 363, single strap R01-2001
3. Head harness SR 362, cradle strap R01-2002
4. Membrane seat
5. Exhalation membrane
6. Protective cap
7. Inhalation membrane
8. Pre-filter holder
9. Pre-filter SR 221
10. Particle filter P3 R, SR 510
11. Gas filter A1, SR 217
11. Gas filter A2, SR 218
11. Gas filter AX, SR 298
11. Gas filter ABE1, SR 315
11. Gas filter ABE2, SR 294
11. Gas filter K1, SR 316
11. Gas filter K2, SR 295
11. Gas filter ABEK1, SR 297
Combined filter filter
ABEK1-Hg-P3 R, SR 299-2
Membrane kit SR 369, fig. 4
Inhalation membrane
Exhalation membranes
Protective caps
Service kit, fig. 5
Head harness
Membrane kit
Pre-filter holder
Protective hood SR 64, fig. 6
Protective hood SR 345, fig. 7
Protective hood SR 346, fig. 8
Storage box SR 230, fig. 9
Storage bag SR 339, fig. 10
Voice amplifier SR 324, fig. 11
Test adapter SR 328, fig. 12
ID-tag SR 368
Cleaning tissues SR 5226,
box of 50, fig. 13
Ordering No.
H01-2112
H01-2012
H01-2812
H01-2712
H01-2612
-
-
-
-
-
-
R01-0605
H02-0312
H02-1312
H02-2512
H02-2112
H02-2412
H02-3212
H02-3312
H02-4212
H02-4312
H02-5312
H02-6512
R01-2004
-
-
-
R01-2005
-
-
-
H09-0301
H09-1012
H09-1112
H09-3012
H09-0112
T01-1217
T01-1202
R09-0101
H09-0401
29