Delivery Check; Accessories / Spare Parts - Sundstrom SR 500 EX Instrucciones De Uso

• If you can smell or taste the pollutants.
• If you experience dizziness, nausea or other
discomfort.
Limitations
• The SR 500 EX ATEX/IECEx approval applies only
when all components are ATEX/IECEx approved.
Therefore, when purchasing spare parts and
accessories, always make sure of their proper
approval if the equipment is to be used in explosive
atmospheres.
• The protective films for the head tops are not
ATEX/IECEx approved and must not be used if the
equipment is to be used in explosive atmospheres.
• The battery must not be charged in explosive
atmospheres.
• The SR 500 EX must always be used with two
particle filters or two combined filters.
• If the user is exposed to very high work intensity, a
partial vacuum may occur in the head top during the
inhalation phase, which may involve the risk of
leakage into the head top.
• The protection factor may be reduced if the
equipment is used in surroundings in which high
wind speeds occur.
• Be aware that the breathing hose might make a loop
and get caught up by something in your surrounding.
• Never lift or carry the equipment by the breathing hose.
• The filters must not be fitted directly to the head top.
• Only use Sundström filters.
• The user should take care not to confuse the
markings on a filter to standards other than
EN 12941:1998 and EN 12942:1998 with classification
of the SR 500 EX fan unit when used with this filter.
2. Parts

2.1 Delivery check

Check that the equipment is complete in accordance
with the packing list, and undamaged.
Packing list
• Fan unit SR 500 EX, bare
• Battery SR 501 EX
• Belt SR 508 EX
• Filter adapters SR 511, 2x
• Particle filters P3 R, SR 510, 2x
• Pre-filters SR 221, 10x
• Pre-filter holders SR 512 EX, 2x
• Flow meter SR 356
• Battery charger SR 513 EX
• User instructions
• Cleaning tissue SR 5226
• Vaseline tube
• Plug kit

2.2 Accessories / Spare parts

Fig. 1.
Item
No. Part
1. Hood SR 561
2. Hood SR 562
3. Hood SR 520 M/L
3. Hood SR 520 S/M
4. Hood SR 530
5. Hood SR 601
6. Hood SR 602
7. Face shield SR 540 EX
8. Face shield SR 570
9. Full face mask SR 200, PC visor
9. Full face mask SR 200, glass visor
10. PU hose SR 550 for SR 200
10. Rubber hose SR 551 for SR 200
11. Helmet with Visor SR 580
12. Hose SR 541 for SR 540
13. O-ring for breathing hose
14. Flat gasket for hose SR 541
15. Flow meter SR 356
16. Belt SR 508 EX
16. Rubber belt SR 504 EX
16. Belt PVC EX
17. Leather belt SR 503 EX
18. Harness SR 552 EX
19. Battery SR 501 EX, 2,1 Ah
20. Battery charger SR 513 EX
21. Fan SR 500 EX, bare
22. Gasket for fan
23. Pre-filter holder SR 512 EX
24. Pre-filter SR 221
25. Pre-filter holder
26. Particle filter P3 R, SR 510
27. Filter adapter SR 511
28. Particle filter P3 R, SR 710
29. Gas filter A2, SR 518
30. Gas filter ABE1, SR 515
31. Gas filter A1BE2K1, SR 597
32. Combined filter
33. Storage bag SR 505
34. Steel net disc SR 336
35. Vaseline tube
36. Plug kit
3. Use
3.1 Installation
See also the user instruction for the head top.
3.1.1 Battery
New batteries must be charged before they are used
for the first time. See 3.2 Assembly.
3.1.2 Filters
The choice of filters/combined filters depends on factors
such as the type and concentration of pollutants. The
fan unit may be used with only particle filters or with a
combination of particle filters and gas filters.
The following filters are available for the SR 500 EX:
• Particle filter P3 R (PAPR-P3), model number SR 510.
Used with an adapter. Two filters are supplied with the
fan. Can be combined with a gas filter.
• Particle filter P3 R (PAPR-P3), model number
SR 710. Provided with a thread, and there is no need
for an adapter. Cannot be combined with a gas filter.
• Gas filter A2 (PAPR-A2), model number SR 518.
Shall be combined with a particle filter.
Ordering No.
• Gas filter ABE1 (PAPR-ABE1), model number
H06-5012
SR 515. Shall be combined with a particle filter.
H06-5112
• Gas filter A1BE2K1 (PAPR-A1BE2K1), model number
H06-0212
SR 597. Shall be combined with a particle filter.
H06-0312
• Combined filter A1BE2K1-Hg-P3 R (PAPR-
H06-0412
A1BE2K1-Hg-P3), model number SR 599.
H06-5412
H06-5512
H06-6012
A1BE2K1-Hg-P3 R, SR 599
H06-6512
H01-1212
H01-1312
T01-1216
T01-1218
H06-8012
R06-0501
R06-0202
R06-0506
R03-0346
R06-2148
T06-2150
T06-2151
T06-2149
T06-2002
R06-2002
R06-2003
R06-2001
R06-0107
R06-2023
H02-0312
R01-0605
H02-1312
R06-0105
H02-1512
H02-7012
H02-7112
H02-7212
H02-7312
T06-0102
T01-2001
R06-2016
R06-0703
43