Cavist 7 Manual De Usuario página 11

Removing the shelves for cleaning
o To remove any of the shelves from the rail compartment, move the shelf to the position where the
notch of the wooden shelf is directly under the plastic post and lift the wooden shelf. Please ensure
these are replaced when the shelf is put back.
o Make sure the shelves are fully engaged before loading any bottles into the cabinet. Pull the shelves
out all the way to the STOP position and push them back in several times to make sure the shelves
are properly engaged.
Moving your wine cabinet
If you need to move your wine cabinet to another location you should follow the steps outlined below.
o Remove all items from the wine cabinet.
o Securely tape down all loose items such as the shelves inside of the appliance.
o Turn the adjustable foot up to the base to avoid damage.
o Tape the door closed.
o Ensure that the appliance stays secure in the upright position during transportation. Also
protect the outside of the appliance with a blanket or similar item.
Power failure
o Most power failures are corrected within a few hours and should not affect the temperature of
your appliance if you minimise the number of times the door is opened.
o If the power is going to be off for a longer period of time, you need to take the proper steps to
protect the contents.
IMPORTANT: If the appliance is unplugged, the power is lost or turned off you must wait 3 to 5
minutes before restarting the wine cabinet. If you attempt to restart before this time delay, the
wine cabinet will not turn on.
11