Troubleshooting - Cavist 7 Manual De Usuario

Troubleshooting

PROBLEM
Appliance does not
operate
Temperature inside the
appliance is too warm.
Temperature inside the
appliance is too cold
Vibration
Moisture is forming on
the inside of the
appliance.
Moisture is forming on
the outside of the
appliance.
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste
product into communities, you will need to inform your local authorities about the places where you can
return this product. In fact, electrical and electronic products contain hazardous substances that have
harmful effects on the environment or human health and should be recycled. The symbol here indicates that
electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05
Not plugged in.
The circuit breaker has tripped or the fuse has blown.
The temperature controls are set too warm. Set the temperature controls
to a cooler setting and allow several hours for the temperature to
stabilise.
The door is being kept open too long or is being opened too frequently,
which is allowing warm air to enter the appliance.
The door is not closed completely.
The door gasket is not sealing correctly.
The appliance has recently been disconnected from the mains supply; it
will take at least four hours for it to get down to temperature again.
The temperature controls are set too cold. Set the temperature controls
to a warmer setting and allow several hours for the temperature to
stabilise.
Check to ensure that the appliance is on a level surface.
The appliance is touching the back wall behind it. Reposition the
appliance and move it from the wall.
If vibration continues to occur, then turn off the appliance and unplug it
from your mains supply. Then contact the Customer Care Department for
assistance.
The door is slightly open.
The door is being kept open too long or is being opened too frequently.
Open the door less often.
The door is not sealed properly.
The door is slightly open, causing cold air from inside the appliance to
meet warm, moist air from the outside.
POSSIBLE CAUSE
16