Cavist 7 Manual De Usuario página 8

o During this period of time, you should try not to open the door frequently or place bottles inside
of the appliance.
o If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting the
appliance or reconnecting it to your mains supply.
Switching on the appliance and setting the temperature
o To switch the appliance on, press the ON / OFF control button (1) for 5 seconds.
o The temperature setting for the appliance is adjustable within the range of 5°C - 22°C / 40°F /
72°F.
o When you press the temperature plus (4) or minus (5) button for the first time, the LED display
will show the factory default temperature setting of 12°C / 54°F.
o Use the temperature plus (4) and minus (5) buttons to set the desired internal temperature.
o The temperature will increase by 1°C or 1°F if you touch the plus button (4) once and will
decrease by the same amount if you press the minus button (5) once.
o When you set a new temperature, the display will show the previous temperature for 5 seconds,
before showing the actual temperature. During this time, the cabinet temperature will adjust
accordingly.
o To view the set temperature in the wine cabinet, press the plus (4) or minus (5) button. The
display will flash the temperature for 5 seconds.
o Cool air falls and warmer air rises, so there will be a slight temperature variation between the
top of the cabinet and the bottom of the cabinet.
IMPORTANT: When the temperature is changed, the compressor works harder to reach the
required temperature. During this time, the side panels of the wine cabinet can reach up to
45°C however they will cool down when the set temperature is reached.
Changing between Fahrenheit and Celsius
o You can select whether the temperature display shows Celsius or Fahrenheit.
o To alter what the temperature display is showing, press the plus button (4) for 5 seconds.
o You cannot change the display if you are in the process of adjusting the temperature of the
wine cabinet.
8