Ironing With Steam Blast; Pausing Operation Of The Steam Iron; After Use; Drip-Stop Function - Silvercrest SDB 2400 F4 Instrucciones De Uso

Ironing with steam blast

■ The steam blast function is especially suitable for smoothing difficult­to­reach
parts of a garment .
NOTE
► The temperature control 8 must be turned to at least the setting range
Otherwise no steam will be produced .
1) Raise the steam iron slightly .
2) For a steam blast, press the steam blast button
steam blast function to smooth hanging textiles .
3)

Pausing operation of the steam iron

WARNING! RISK OF FIRE!
► Never leave a hot steam iron unattended if it is switched on or connected
to the mains power supply .
1) Move the temperature control 8 to the "MIN" position .
2) Stand the steam iron only on the base 0 .

After use

■ Remove the plug from the mains power socket .
■ Empty the water tank and clean the sole of the iron q .
■ Place the cooled­down steam iron on the base 0 .

Drip-stop function

With conventional steam irons, water can drip from the sole of the iron q at low
temperatures . This iron however, possesses a new feature, the DRIP­STOP function
(
blast function . When this happens, you will hear a "CLICK" . Then set a suitable
temperature with the temperature control 8 . As soon as this is reached, steam
production is resumed .
SDB 2400 F4
Hold the iron vertically and press the steam blast button
) . At low temperatures, the iron automatically switches off the steam­
4 . You can also use the
4 .
GB │ MT │
.
51 ■