Descargar Imprimir esta página

Plugging In And Ironing; Steam Ironing; Ironing With Steam Blast; Putting The Steam Iron Down - Silvercrest SDBE 2600 A1 Instrucciones De Uso

Ocultar thumbs Ver también para SDBE 2600 A1:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 64

Plugging in and ironing

Dry ironing without steam is possible at all tempera-
tures, steam ironing is only possible from the setting
range
on the temperature control
Insert the plug into a mains power socket.
CAUTION! PROPERTY DAMAGE!
If the clothing care instructions forbid ironing,
(
symbol), the clothing item may not be
ironed. Ignoring this warning could lead to
permanent damage to the clothing item.
Check the care instructions on the labels in
garments to see if they are suitable for being
ironed, and at which temperature setting.
Temperature
control
icon
Select the appropriate temperature setting using
the temperature control
NOTE
While it is heating up, always place the iron on
the base
.
If you place the iron down on its sole
not move it, the automatic switch-off will be acti-
vated after 30 seconds (see chapter "Automatic
switch-off") and the appliance stops heating.
SDBE 2600 A1
.
Type of Material
Acrylic, rayon
Silk, wool,
polyester mix fabrics
Cotton, linen,
viscose
.
and do
The temperature control lamp
the control lamp
goes out, the set temperature
has been reached.
Wait until the temperature control lamp
goes out.
To moisten the laundry, press the spray
button
.
This function is suitable for very dry and very
crumpled garments.

Steam ironing

Set the steam control
setting.
The temperature control
least the setting
be produced.

Ironing with steam blast

The steam blast function is especially suitable for
smoothing difficult-to-reach parts of a garment.
Raise the steam iron slightly.
For a steam blast, press the steam blast
button
.
You can also use the steam blast function to smooth
hanging textiles.
Hold the iron vertically and press the
steam blast button

Putting the steam iron down

RISK OF FIRE!
Never leave a hot steam iron unattended if
it is switched on or connected to the mains
power supply.
lights up. When
to the desired steam
must be set to at
. Otherwise no steam can
.
GB │ IE
 19

Publicidad

loading