Plugging In And Ironing; Steam Ironing; Ironing With Steam Blast; Temporarily Setting The Steam Iron Aside - Silvercrest SDB 2200 C1 Instrucciones De Uso

Plugging in and ironing

Dry ironing is possible at all temperatures, steam iro-
ning is possible by adjusting to
thermostat 8.
• Insert the plug into a power socket.
Attention!
Should the clothing care instructions forbid ironing,
(symbol ), the clothing item may not be ironed.
If you do so, the clothing item could be permanently
damaged.
• Check the care instructions on the labels in the
garment to see whether it is suitable for being
ironed, and at which temperature setting.
Symbol thermostat 8
• Select the best suitable temperature setting with
the thermostat 8.
The temperature control lamp 7 glows. When the
set temperature has been reached, the temperature
control lamp 7 goes out.
• Wait until the temperature control lamp 7
switches off.
• To moisten the laundry, press the button for fine
water spray 5.
This function is suitable for extremely dry and extremely
crumpled garments.
All manuals and user guides at all-guides.com
on the
Type of material
Acrylic, rayon
Silk, wool, polyester
blended fabrics
Cotton, linen, viscose

Steam ironing

• Set the steam regulator 3 to the desired steam
setting.
• The thermostat 8 must be moved to at least
adjustment range
produce any steam.

Ironing with steam blast

The steam blast is especially suitable for smoothing
parts of a garment that are difficult to reach.
• Slightly raise the steam iron.
• For a steam blast, press the steam blast
4.
button
Temporarily setting the steam
iron aside
Risk of fire!
NEVER leave the hot, mains-connected or switched-on
steam iron unattended.
• Set the thermostat 8 to the "MIN" position.
• Always put the steam iron on the appliance
base 0.

Turning off the steam iron

• Remove the plug from the wall socket.
• Empty the water tank and clean the ironing
sole q.
• Put the steam iron on the appliance base 0
after it has cooled down.
- 37 -
. Otherwise it cannot