Health Advice; Blade Safety - Evolution STEALTH RAGE 3-S Instrucciones Originales

4) General power Tool Safety Warnings
(2.5)
[power tool use and care].
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better
and safer at a rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on or off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the power tool from the
power source and/or battery pack from the
power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventative safety measures reduce the
risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of moving parts and any other
condition that may affect the power tools
operation. if damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
5) General power Tool Safety Warnings
(2.6)
[Service]a) have your power tool serviced by
a qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
www.evolutionpowertools.com
(2.7)

hEALTh ADViCE

WARNiNG: If you suspect that paint on
surfaces in your home contains lead seek
professional advice. Lead based paints should
only be removed by a professional and you
should not attempt to remove it yourself.
Once the dust has been deposited on
surfaces, hand to mouth contact can result
in the ingestion of lead. Exposure to even
low levels of lead can cause irreversible brain
and nervous system damage. The young and
unborn children are particularly vulnerable.
(2.8)
WARNiNG: Some wood and wood type
products, especially MDF (Medium Density
Fibreboard), can produce dust that may be
hazardous to your health. We recommend the
use of an approved face mask with replaceable
filters when using this machine, in addition to
using the dust extraction facility.
(3.5)
MiTRE SAW SpECiFiC SAFETY
The following specific safety instructions for
Mitre Saws are based on the requirements of
EN 61029-2-9:2012+A11.
• Not to use saw blades manufactured
from high speed steel.
• Use only the saw with guards in
good working order and properly
maintained, and in position.
• Always to clamp workpieces to the
saw table.

BLADE SAFETY

WARNiNG: Rotating Saw Blades are extremely
dangerous and can cause serious injury and
amputation. Always keep fingers and hands
at least 150mm (6") away from the blade at all
times. Never attempt to retrieve sawn material
until the cutting head is in the raised position,
the guard is fully closed and the saw blade has
stopped rotating. Only use saw blades that are
recommended by the manufacturer and as
10