Functions - hafele FT 200 Manual De Instrucciones

MLA 6P
Feature
Power supply V
in
Current consumption max.
(incl. EFL 3)
Output current / EFL3 output port
Output current / total
Operating temperature
Relative humidity
Feedback contact
Contact NC
Connections
Connection lead (0.5 m) with plug
Socket voltage output
Socket EFL 3 / EFL 3C
Socket Data in (DFT)

3.3 Functions

Up to four EFL 3 / EFL 3C furniture locks can be keyed alike and / or keyed to differ in parallel
with the FT 200 / FT 200 CAP furniture terminal.
With additional MLA 6P / MLA 8 multi-lock adapters, more furniture locks can be implemented

9. Extensions and connections, page 65.
In the event of a power failure, the locks retain the locking status which was present when the
power failed.
Keyed alike operation
An authorised user key simultaneously unlocks all locks which are connected to the
FT 200 / FT 200 CAP furniture terminal and also the MLA 6P / MLA 8 multi-lock adapters if
necessary.
Keyed to differ operation
An authorised user key simultaneously unlocks only certain locks, even though several are
connected to the FT 200 / FT 200 CAP furniture terminal, and also the MLA 6P / MLA 8 multi-
lock adapters if necessary.
Lock allocation can take place in two different ways:
• by presenting the programming key card several times
means of consecutive lock allocation, page 61
• by unlocking the locks
Value
12 V DC
830 mA
< 500 mA (12 V)
< 1000 mA (12 V)
0-50 °C
10–95% not condensed
12 V, 50 mA
24 V, 1 A max
AMP Mate-N-Lock, male
AMP Mate-N-Lock, female
RJ 10
Molex 87833-042

8.4.2 User key allocation by unlocking the locks, page 63

8.4.1 Allocating user keys by
47