Complete Reset; Cleaning And Maintenance; Cleaning - hafele FT 200 Manual De Instrucciones

12.2 Complete reset

A complete reset resets the furniture terminal to the factory settings. All data is cleared. The
system then has to be reconfigured (
A complete reset is required in the following cases:
• Complete erasing of all data (e.g. in the event of return to stocks / warehouse).
• Resetting of software operation to stand-alone operation (SA).
Prerequisites:
1. Press the reset button.

A brief acoustic signal is heard.

13. Cleaning and maintenance

13.1 Cleaning

• Only clean visible antenna surfaces as required.
• Clean the surface of the antenna with a dry, soft cotton cloth or a damp cloth with a little
washing-up liquid or neutral cleaner.
• Do not clean any other system components.
72

5. Start-up, page 51.).
A tool to actuate the reset button, such as a thin pen/pencil or
opened out paper clip
< 1s
2. Press and hold the reset button until two long
acoustic signals are heard.

The LED flashes rapidly in green and red.

All data and access rights are cleared.

The FT 200 switches to start-up mode

( 5. Start-up, page 51)
2x > 1s