Programming A Normal User Key - hafele FT 200 Manual De Instrucciones

6.1 Programming a normal user key

Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard. LED flashes green
for max. 5 seconds.
3. Remove user key.

LED flashes green for a further 5 seconds.
5. Repeat steps 2 to 4 until all necessary user keys have been granted the locking authorisation.
6. The LED switches to red once the 5 seconds have elapsed.
54
Tag-it ™ISO
Programming key card
5 s
5 s
User keys
2. Hold the user key in front of the antenna during
this 5-second period.

Acoustic signal is heard. Locking
authorisation is allocated.
4. Hold another user key in front of the antenna
during this 5-second period.