Programming A Privileged User Key - hafele FT 200 Manual De Instrucciones

6.2 Programming a privileged user key

Tag-it ™ISO
Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard. LED flashes green
for max. 5 seconds.
3. Hold the user key in front of the antenna during
the 5-second period.

Acoustic signal is heard. LED briefly
illuminates green. Locking authorisation is
allocated.
5. Hold another user key in front of the antenna
during the 5-second period.
6. Repeat steps 3 to 5 until all necessary user keys have been granted the locking authorisation.
7. The LED switches to red once the 5 seconds have elapsed.
Programming key card
5 s
2. Hold the programming key card in front of the
antenna again during this 5-second period.

Acoustic signal is heard twice. LED flashes
green more slowly.
1 s
4. Remove user key.

LED continues to flash green slowly.
1 s
User keys
2x 2x/s
2x/s
55