Programming Permanent Deadbolt Lock Operation - hafele FT 200 Manual De Instrucciones

8.3 Programming permanent deadbolt lock operation

Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard. LED flashes in
green for 5 seconds.
60
Tag-it ™ISO
Programming key card
5 s
Tag-it ™ISO
Clearing key card
x
x
2. Hold the clearing key card in front of the
antenna during this 5-second period.

Acoustic signal is heard. LED continues to
flash in green and then goes to continuous
red.

The FT 200 / FT 200 CAP is now set to
permanent deadbolt lock operation.