Cutting Advice - Evolution EVOSAW180HD Manual De Uso

www.evolutionpowertools.com

CUTTING ADVICE

WARNING: The operator should wear all relevant PPE (Personal
Protection Equipment) necessary for the job at hand.
This could include safety glasses, dust masks, safety shoes, etc.
The operator should always be aware of the position and
routing of the power cable.
• Do not force the machine.
• Allow the saw blade to do the work. Cutting performance
will not be improved by applying excessive pressure to the
machine, and blade life will be reduced.
• When using the parallel edge guide, ensure that it is parallel
with the blade. The blade and/or motor could become
damaged if the machine is used with an incorrectly adjusted
parallel edge guide.
• To set the guide, loosen the two retaining screws, and adjust
the guide to the required position. Tighten the locking screws.
• Place front edge of sole plate squarely on the workpiece
before starting the motor.
• When starting a cut, sight the cutting line with the line of cut
guide, taking care to introduce the blade to the material slowly,
so as not to damage its teeth.
• Use both hands to move the saw forward through the
workpiece.
• Apply smooth, constant pressure to move the saw forward
through the workpiece.
When a cut has been completed release the ON/OFF trigger
switch and allow the blade to come to a complete halt. Do not
apply lateral pressure to the blade disc in an attempt to slow it
down more quickly.
WARNING: If the motor should stop or stall whilst a cut is
being attempted release the trigger switch immediately and
disconnect the machine from the power supply. Remove the
machine from the workpiece before investigating the cause and
attempting to restart the motor.
Note: This saw is fitted with an overload protection device. This is
designed to prevent overloading and consequent damage to the
motor. If this feature 'trips' , the motor stops and will not operate.
Allow the machine to cool down and then press the 'reset
switch' at the base of the main handle.
19
EN
ES
FR