Adjusting Tint Of Picture - Alpine CVA-1005 Manual De Operación

1
2
3
196
2 3
1
± 0
GRN RED
RETURN
Other Useful
Features

Adjusting Tint of Picture

Tint adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes.
Tint adjustment cannot be made if a Navigation
system with the RGB feature is connected.
Note: After carrying out the steps 1 to 3 of "To
switch to the display mode screen or to
the picture mode" explained on page
192, perform the operation described
below.
Rotate the rotary encoder while the DISPLAY
mode screen is displayed and select "TINT" to
activate the Tint Adjustment mode. The
Function Guide is displayed.
Press the 1 (; GRN) button to adjust green
and press the 3 (RED :) button to adjust red.
To quickly set to the center position, press the
2 (±0) button.
When the tint adjustment has been completed,
press the FUNC (RETURN) button. The display
returns to the main menu screen.
English