Adjusting Color Of Picture - Alpine CVA-1005 Manual De Operación

Tabla de contenido

Publicidad

1
2
3
198
2
3
1
± 0
THIN
THICK
RETURN
Other Useful
Features
Adjusting Color of
Picture
Color adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes.
Tint adjustment cannot be made if a Navigation
system with the RGB feature is connected.
Note: After carrying out the steps 1 to 3 of "To
switch to the display mode screen or to
the picture mode" explained on page
192, perform the operation described
below.
Rotate the rotary encoder while the DISPLAY
mode screen is displayed and select "COLOR"
to activate the color adjustment mode. The
Function Guide is displayed.
Press the 1 (; THIN) or 3 (THICK :) button
to make the color of the picture brighter or
darker respectively to get your desired color.
You can adjust the color between –15 (min.)
and +15 (max.). When it reaches the minimum
or maximum point, the display shows "MIN" or
"MAX" respectively. To quickly set to the center
position, press the 2 (±0) button.
When the adjustment has been completed,
press the FUNC (RETURN) button. The display
returns to the main menu screen.
English

Publicidad

Tabla de contenido
loading

Tabla de contenido