Technical Data - LaserLiner SuperSquare-Laser 2G Manual De Instrucciones

5 Checking the vertical line
Fix a plumb bob with a line at least 2.5 m in length on the
wall, making sure that the bob can swing freely. Switch on the
laser, direct the lines at the plumb and align the bubble levels (2).
The precision is within tolerance if the deviation between the
laser line and plumb line is not greater than 0.5 mm / m.

Technical Data

Angle accuracy
Operating range
(depending on room illumination)
Laser wavelength
Laser class
Power supply / Operating time
Operating temperature
Storage temperature
Dimensions (W x H x D)
Weight (incl. batteries)
Subject to technical changes 12.2016
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
www.laserliner.com/info
SuperSquare-Laser 2G
± 0.5 mm / m
25 m
515 nm
2 / < 1 mW
2 x 1.5V AA / 3 h
0°C...+ 50°C
-10°C...+ 70°C
200 x 48 x 100 mm
272 g
EN
09