General Safety Instructions - LaserLiner SuperSquare-Laser 2G Manual De Instrucciones

Read the operating instructions and the enclosed
brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain.
This document must be kept in a safe place and
if the laser device is passed on, this document
must be passed on with it.
90° line Laser
– The 2 clearly visible laser lines are ideally suited for
aligning tiles.
– Vertical and horizontal levelling on walls
– The applied lay edges and contact surface make it easy
to position floor tiles.
– Clean application on all surfaces – also when using pins
– Vials to adjust the device
– Angle accuracy: ± 0.5 mm / m

General safety instructions

– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they
should shut their eyes and immediately move away from the
beam.
– Under no circumstances should optical instruments (magnifying
glass, microscope, binoculars) be used to look at the laser
beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst
laser devices are in operation.
– In public areas shield off the laser beam with barriers and
partitions wherever possible and identify the laser area with
warning signs.
– Tampering with (making changes to) the laser device is not
permitted.
– This device is not a toy - keep out of the reach of children.
06
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 515 nm
EN 60825-1:2014