Led-Display - GUTMANN CAMPO II Instrucciones De Uso

Operation via switch
Button Push
1x
b
2x
b
3x
b
4x
b
> 3sec.
b
1x
a
1x long
a
1x
a
b > 5 sec.

LED-Display

Information on the operating status of the cooker hood :
LED
Display of operating status fan ON / OFF
c:

flashing: display of automatic follow-up time
c:
(the hood automatically switches down by one power level every 5 minutes
.
until it is finally switched off)
Fan output level 1 (low motor output)
1
Press button b 1x

Fan output level 2 (medium motor output)
2
Press button b twice

Fan power level 3 (high motor power)
3
Press button b three times

Intensive level (motor automatically switches back to level 3 after 5 minutes)
i
Press button b 4x

Filter saturation display
f
When the red LED lights up / flashes, the metal filters must be cleaned (see
section Cleaning and care). The filter saturation indicator lights up after max.
.
15 operating hours (even when not cooking). After cleaning, press the reset
button (b) for about 10 seconds until the LED goes out. ( Only possible when
the device is switched on - TW function is deactivated when the red LED flashes ! )
Fan ON Motor runs at level 1, LED (c) + 1 on.
Motor runs at level 2, LED (c) + 1-2 on.
Motor starts at level 3, LED (c) + 1-3.
Motor starts at intensive level, LED (c) + 1-4 starts.
Motor automatically switches back to level 3 after 5 minutes.
Colour temperature adjustment ( only TW version )
Pressing and holding button (b) will start the color change ( 2700 -
6500K ) and the last value will also be stored when
( only available when the engine is stopped )
Execution
Motor switches off
Lighting OFF
Lighting dimmer-funktion
Lighting OFF
en
released.
19