CB88 Beltpack Transmitter - Features
1.
Input Connector - Connect the input device via the mini-XLR connector. The CB88 is
supplied with either a lavalier, headset microphone or 1/4" instrument cable.
2.
Status Indicator - This LED displays the operation mode:
3.
Power/Mute Switch - Press and hold to turn the unit on or off. Press and release to mute or
unmute the transmitter.
4.
Belt Clip - Use this clip to fasten the CB88 transmitter to a belt or guitar strap.
5.
Battery Cover Release - Push in both sides and pull back to open the CB88 battery cover.
6.
Antenna - This permanently attached transmitter antenna should be fully extended during
normal operation.
Concert 88x Wireless System
GREEN
RED
Flashing GREEN
Normal Operation
Mute
Low Battery
9