Waste Disposal; Technical Data - Walther PILOT Trend Serie Instrucciones De Servicio

10

Waste Disposal

Waste spraying media and waste material from cleaning and servicing must be dis-
posed of in accordance with all applicable local and national regulations.
l
Warnung
Observe the instructions issued by the manufacturers of the spraying and cleaning
material at all times. The improper disposal of waste material endangers the health of
human beings and animals!
11

Technical Data

PILOT Trend-HD
Net weight
Air cap 6-bore-air cap Nozzle sizes optional:
max. operating
temperature
PILOT Trend-MD
Net weight
Air cap 8-bore-air cap Nozzle sizes optional:
max. operating
temperature
Air consumption:
Atomising air pres-
sure - type HD
1 bar
2 bar
3 bar
4 bar
5 bar
6 bar
Type MD:
The air concumption is 270 l/min. with an input air pressure of 3.3 bar.
Right to effect technical changes reserved.
9
438 g Pressure ranges:
max. input air pressure
0.5 • 0.8 • 1.0 • 1.2 • 1.5 • 1.8 • 2.0 • 2.5 mm ø
Noise level
43 °C (measured at approx.
1 m from the spray gun)
438 g Pressure ranges:
max. input air pressure
max. spraying pressure
0.5 • 0.8 • 1.0 • 1.2 • 1.5 • 1.8 • 2.0 • 2.5 mm ø
Noise level
43 °C (measured at approx.
1 m from the spray gun)
Round jet Wide jet
in l/min. in l/min.
75 105
120 170
165 240
215 310
265 380
310 450
8 bar
83 dB (A)
3,3 bar
1,4 bar
79 dB (A)