Ways Of Releasing Air Outdoors - Bosch B1 RKM 10015 Instrucciones De Manejo

Ways of releasing
air outdoors
Temporary installation
26
The appliance lowers the temperature and dries
the air in the room at the same time in order to
create ideal air conditions.
If the appliance turns itself off due to the
thermostat, it will come back on again
automatically when the ambient temperature
rises 2°C!
Condensed water formed during air conditioning
evaporates automatically and is expelled
outdoors, together with hot air, through the hot-
air expulsion duct.
In conditions of extreme humidity, the appliance
accumulates water in an internal tank.
When the water in this tank reaches a certain
level, safety pilot light comes on, indicating that
the tank needs to be emptied.
You may also use the Dehumidification Mode to
empty the water. To do this,
first turn the appliance off and wait 10 minutes in
order for the safety systems to reset. Having
done this, proceed as described in the section
"Dehumidification".
Connect the diffusion duct to the hot-air
expulsion duct.
Leave the window ajar and feed the
air–expulsion nozzle through the gap. On
windows with double frames, feed the expulsion
nozzle through the gap in the middle.
Close the window as much as possible and
secure it in place using the suction pad provided.