Troubleshooting - Master TS 3A Manual De Instrucciones

►►3. ASSEMBLY
(Fig. 1-3-5) Some models can be fitted
with wheels, handles and supports. These
components, complete with relative nuts and
bolts, situated inside the appliance packaging,
must be assembled before switch-on.
►►4. �UNCTIONING
WARNING: Read,
follow the "INFORMATION ON SAFETY"
before starting the appliance, in order to
correctly use it and avoid risks.
WARNING: Check the cable is intact
and that the electricity mains features
correspond with
technical data plate.
WARNING: Correctly
support (where present) before using the
appliance and ensure this is positioned
on a perfectly flat, stable and level
surface.
►SWITCH-ON:
Connect the appliance to the electricity
mains.
MODEL 1:
(Fig. 1-2)
Three heating power
possible (see technical data table):
-The appliance works at power 1 by placing
switch "A" at "ON/I".
-The appliance works at power 2 by placing
switch "B" at "ON/I".
-The appliance works at power 3 by placing
both switches at "ON/I".
►►6. TROUBLESHOOTING
PROBLEM
The appliance 1. Interrupted connections
does not start
2. Faulty heating element
3. Incorrect work position
understand and
the appliance's
assemble the
adjustments
POSSIBLE CAUSE
MODEL 2:
(Fig. 3-4)
Only one heating power adjustment is
possible (see technical data table):
-The appliance works at maximum power by
placing the switch at "ON/I".
MODEL 3:
(Fig. 5-6)
Two heating power adjustments are possible
(see technical data table):
-The appliance works at power 1 by placing
the switch at "ON/I".
-The appliance works at power 2 by placing
both switches at "ON/I".
►►SWITCH-OFF:
Place the switch or switches at "OFF/O".
Disconnect the appliance from the electricity
mains and wait a few minutes for it to cool
before putting it away.
►►5. PRESERVATION
Disconnect the appliance from the electricity
mains and wait a few minutes for it to cool
before putting it away. Put it back in a dry place
and protected from dust. When the appliance
is used again, check the maintenance state
of the electricity cable. If in doubt regarding its
are
preservation, request the after-sales service
intervention. However, have the applianced
checked once a year.
Any appliance maintenance must only be
carried out by specialised personnel and
authorised by the manufacturing company.
POSSIBLE SOLUTION
1a. Correctly insert the power supply cable
in the electricity mains socket.
1b. Contact after-sales centre
2. Contact after-sales centre
3. Place the appliance on a flat levelled
surface (MODEL 1)
en
it
de
es
fr
nl
pt
da
fi
no
sv
pl
ru
cs
hu
sl
tr
hr
lt
lv
et
ro
sk
bg
uk
bs
el
zh