Troubleshooting; Technical Specifications - Master TS 4 AI Manual De Uso

REGULAR CLEANING AND
INSPECTION
Before storing the heater for long periods of time,
clean it thoroughly. Always place it in a dry room and
protect it from dust. Before reusing the heater, check

TROUBLESHOOTING

WARNING: The heater has an internal protection sistem and stops when it overturns.
FAULT
The heater doesn't start

TECHNICAL SPECIFICATIONS

Power supply
Heating power 1
Heating power 2
Maximum heating power
Maximum absorption
CAUSE
Incorrect position
Faulty connections (interrupted)
Faulty lamps
220/240V – 50Hz
800W
1600W
2400W
10,5A
REGULAR CLEANING AND INSPECTION
TECHNICAL SPECIFICATIONS
the conditions of the power cable. When in doubt, call
the Technical Assistance.
The heater should always be inspected once a year.
The heater should
technicians authorized
CORRECTIVE ACTION
Place the heater in the correct
position on its feet.
Disconnect the plug and inspect
the connections
Replace
TROUBLESHOOTING
be serviced by qualified
by the manufacturer.
2
GB