Jole tilt Manual De Instrucciones página 12

Disassembly of the Shoulder
Harness
1. Pull up the webbing adjuster,
while pulling the shoulder
harness straps to the proper
position.
8
- 1 Webbing adjuster
8
2. Remove the webbing cover
from the body.
29
3. At the back of the seat,
disassemble the two shoulder
harnesses from the T-shaped
steel plate.
30
4. Pull out the shoulder harness
straps.
31
5. Thread the shoulder harness
covers through the shoulder
harness strap slots.
32
21
29
30
31
32
Assembly of the Shoulder
Harness
1. Choose the proper shoulder
harness slots and thread the
shoulder harness covers
through them.
33
!
Always ensure that shoulder
harness covers are
assembled with rubber side
facing down towards child.
2. Thread the shoulder harness
straps through the shoulder
harness covers.
34
!
To avoid the shoulder harness
from getting twisted, please
engage the buckle first.
3. Thread the shoulder harness
straps through the shoulder
harness slots.
35
33
34
35
22