Jole tilt Manual De Instrucciones página 9

5. While pressing the child
restraint firmly into the vehicle
seat, pull the vehicle shoulder
belt to fasten the child restraint
tightly and securely.
18
!
Please check if the child
restraint is installed tightly by
moving the child restraint
back and forth at the vehicle
belt path (child restraint
should not move more than
25mm/1").
!
The child restraint cannot be
used if the vehicle safety belt
buckle (female buckle end) is
too long to anchor the child
restraint securely. - 3
18
6. Press button to open the
locking clip.
19
7. Thread the diagonal belt
through the locking clip, and
then fasten the locking clip.
15
18
3
19
20
20
8. While pressing the Car seat,
pull the belts to fasten the Car
seat tightly and securely.
21
9. Unlock the device first - 1
22
and slip it as close as possible
to the buckle. - 2
22
10. Refasten the locking clip.
21
22
23
23
16