Control Pad Functions; Temperature Conversion - Kenmore 790.45792 Manual De Uso

Note: The appearance of your oven control may differ slightly from the one illustrated below.
However, all functions are the same. Also, push buttons or pads may be shaped
differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of
your oven, become familiar with the various functions of the oven as described below.
OFF CANCEL PAD— Used to clear
any function previously entered
except the time of day and minute
timer. Push OFF CANCEL to stop
cooking.
BAKE PAD—
Used to
enter the normal
baking mode
temperature.
BROIL— Used
to select the
variable broil
function.
CLEAN PAD—
Used to select
the self-cleaning
cycle.
OVEN, PREHEAT & LOCK LIGHTS— The "OVEN" light will glow each
time the oven unit turns on to maintain the set oven temperature. The
"PREHEAT" light will glow when the oven is first set to operate, or if the
desired temperature is reset higher than the actual oven temperature.
The "LOCK" light will flash until the door locks when the self-clean
cycle is in use. It glows constantly after the door locks.
The oven can be programmed to: BAKE normally, TIME BAKE, BROIL, SELF-CLEAN
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for
silent operation. Push and hold STOP TIME pad
from sounding when a pad is pushed. To return the sound, push and hold STOP TIME pad
beep is heard.
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory.
The oven can be programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (celsius) or from °C to °F (control should not be in a
Bake or Clean mode):
1. Push BROIL pad . "- - " appears in the display.
2. Push and hold the UP ARROW
3. Push and hold BROIL pad
4. Push UP or DOWN ARROW
5. Push any function pad to return to normal operating mode.
UP and DOWN ARROWS PADS — Used along with
the function pads to select oven temperature,
cooking time, stop time (when programming an
automatic stop time), time of day, clean time and
minute timer.
3SEC
OFF
BAKE
CANCEL
BROIL CLEAN
Note: The oven function will not work if the time of day clock is not set.
pad until "HI" appears in the display.
until °F or °C appears in the display.
pad to change °F to °C or °C to °F.
OVEN
PREHEAT
DOOR LOCKED
. After 7 seconds, the control will beep once. This will block the controls
9
Control Pad
Functions
CLOCK PAD—
Used to set the
time of day.
CLOCK COOK
SET TIME
TIMER
STOP
ON/OFF
TIME
TIMER PAD — Used to set
or cancel the minute timer.
The minute timer does not
start or stop cooking.
again for 7 seconds until 1
Temperature
Conversion
(Fahrenheit / Celsius)
FEATURE
INDICATOR
LIGHTS— These
light to show
which feature is
in use.
BAKE TIME
PAD — Used
to enter the
length of the
baking time
(if equipped).
STOP TIME
PAD — Used
to set the
desired stop
time for
baking. Can
be used with
BAKE TIME to
program a
delayed bake
cycle (if
equipped).