Operation; Maintenance/Cleaning - Vortice Air Door Serie Manual De Instrucciones

ENGLISH
After installation is complete, connect the product to
the power supply using the provided plug as shown in
fig.17.
17 17

Operation

The appliance functions can be activated using the
remote control; these are, in order:
ON->maximum speed->minimum speed->OFF.
After activating the appliance, adjust the air outlet
grille to direct the jet of air as desired.
Connection to door opening sensors
The product starts to operate when the door is opened
and the sensor terminals lose contact. (Fig.18); When
the door closes and the two terminals are in contact
again the product will stop to operate (fig.19).
18 18
ON
1
16
19 19
1

Maintenance/cleaning

Before carrying out any type of cleaning or
maintenance work, turn the appliance off and unplug
it from the power supply.
Do not use chemicals such as petroleum, benzene or
thinners to clean the appliance.
Do not let water or liquids enter the appliance motor.
1
OFF
1