Maintenance; Replacing The Oil; Cleanliness; Replacement Parts - SKF TMJL 50 Instrucciones De Uso

4. Maintenance

4.1 Replacing the oil

When replacing the oil or after maintenance, make sure no air is trapped in the system.
This should be checked before attaching the hose to the application by making sure only
air-free oil comes out of the hose when pumping.
Only use clean, recommended hydraulic oils.

4.2 Cleanliness

Keep the pump clean from dirt and metal particles in order to avoid excessive wear.

4.3 Replacement parts

Designation
TMJL 50-1
TMJL 50-2
728245/3A
729831 A
729832 A
729834

4.4 Accessories

Designation
TMJL 100-3
1077587
LHMF 300/5
LHDF 900/5
THGD 100
TMJL 100-5
Items marked * are ONLY for TMJL 50DU.
SKF TMJL 50
Description
Hand-pump (sub-assembly)
Repair kit
Carrying case
Quick connection coupling, G 1/4
Quick connection coupling, G 1/4
High pressure hose
Description
Gauge connection nipple
Pressure gauge (120 MPa, 100 mm)
Mounting fluid (5 litre, 300 mm
Dismounting fluid (5 litre, 900 mm
Precision digital gauge*
Nipple for digital pressure gauge*
/s at 20 °C)
2
/s at 20 °C)
2
7