KIKKA BOO XAMMY Instrucciones De Uso página 8

WARNINGS
• The product is suitable for age 12-72 months of children's use.
• Users or guardians should read the manual carefully before use Please save for future reference. If not used in accordance with this speci cations, you risk the
safety of your children.
• Keep away from re!
• Adult must be together with their children, when the children use the product.
• Don't ride the trike on the slope, on the street or on the highway.
• Carrying capacity: 30kg.
• Please mind the children's feet on the pedals while pushing the trike. 8. Please check all fasteners regularly.
• EN 71-1/2/3;
1.PARTS: 1. Frame; 2. Front fork; 3. Rear wheel; 4. Front wheel; E. Pushbar (bottom); 6-1. M6*30 screw ;6-2. M6 nut; 6-3 3.6mm shim; 7. Handlebar; 8. Back rest;
9. Rear basket; 10. Pushbar (up); 11. Canopy; 12. Foot rest; 13. Saft guard; 14. Fender;
15. Seat; 16. Bottle holder; 17-1. M6*20 screw; 17-2. M6*68 screw; 17-3. M6 nut; 18-1. M5*50 screw; 18-2. M5 nut; 18-3 3.5mm wrench;
ASSEMBLE
2.1. Insert the front fork(2) into the front wheel(4),then tighten them with M6X30 screw(6-1), M6 nut(6-2), 6MM shim(6-3)(5N*M).
2.2. Insert the fender(14)into the front fork(2), make sure the arrow mark is in the front.
3.1. Press the button on the rear fork of the frame(1),then trun the rear axle from inside to outside untill hear "click".
3.2. Take o the screw on the rear axle,insert the rear wheel(3)into the rear axle, then tighten them up with screw(5N*M).
4.1. Insert the front wheel into the frame (1).
4.2. Take o the screw on the handlebar (7),then insert the handlebar into the front fork (2),Last, tighten them up with screw (5N*M).
5.1. Insert the back rest (8) into the hole on the frame, then tighten them up with M6*65 screw(17-3), M6 nut(17-2)(5N*M).
5.2. Insert the seat onto the middle of the frame,then tighten them up with M6*35 screw (5N*M).
6.1. Install the bottle holder (16) at the front of handlebar (7).
6.2. Take o the screw and plastic on the foot rest (12), then insert the foot rest into the bottom of the frame, last, tighten them with up screw and plastic
(3N*M).
6.3. Insert the safe guard (13) into the bottom of the back rest,then tighten them up with screw(18-1),nut(18-2) (5N*M).
7.1. Install the canopy (11) into the back rest (H).
7.2. Insert the bottom pushbar (5) into the steering tube, then tighten them up with scre (3N*M). Insert the up pushbar (10) into the bottom pushbar,untill
hear"click".
7.3. Insert the rear basket (9) into the backside of the frame (1).
FUNCTIONS
8. Foldable foot rest.
9. Brake.
10. Free wheel.
11. Adjustable back rest.
12. Adjustable canopy.
13. Push mode/ Ride mode.
14. Walkers mode.
MAINTENANCE
1. Please throw away all packaging materials and protective materials after unpacking. 2. Check if all fastening parts are tighten before each use. If not checked,
you risk your child to be hurt! 3. It's dangerous if all parts are not installed correctly! 4. Avoid prolonged wet, cold or high-temperature environment of the use or
storage. 5. Avoid crashing another hard objects and obstacles. 6. Don't wipe with wet cloth the paint surface of the product, or surface will lose its luster or paint
will take o . 7. Lubricating the welding parts with natural oil polishing could help preventing rust. 8. This product has two purposes: (1) Children move the trike
by pedaling. (2) Adults move the trike by pushing it. 9. The toy should be used with caution becaus some skills are required to avoid falls or collisions that may
cause injury of the users or third parties 10. Only adults must install the product.
ENGLISH