Delivery Condition - Chauvin Arnoux XRPTST1 Manual De Instrucciones

Thank you for purchasing this XRPTST1 combined ORP electrode with integrated temperature measurement.
„ For best results with your electrode:
„ read these operating instructions carefully,
„ comply with the precautions for use.
This electrode is for use only with the C.A 10101 pH meter.
The CE marking indicates conformity with European directives, in particular LVD and EMC.
The rubbish bin with a line through it indicates that, in the European Union, the product must undergo selective disposal
in compliance with Directive WEEE 2012/19/UE. This equipment must not be treated as household waste.
The ORP electrode is delivered in a cardboard box with:
„ a shim,
„ a storage bottle.
For the accessories and spares, consult our web site:
www.chauvin-arnoux.com
The ORP electrode serves to measure the oxidation reduction potential of a solution.
ORP = Oxidation Reduction Potential
„ Remove the storage bottle.
„ Connect the electrode to the measuring instrument.
„ Calibrate the electrode with a buffer solution, then rinse it with de-ionized water.
„ Plunge the end of the electrode in the solution to be measured; make sure that the platinum and the junction are submerged.
„ Wait for the measurement to stabilize.
„ Rinse the electrode with de-ionized water between measurements.
„ When the measurements are over, put the electrode back in the storage bottle.
So as not to damage the electrode, do not make measurements in any of the following solutions:
„ hydrofluoric acid solution,
„ acid and alkaline solutions at high concentrations (> 2 mol/L)
„ clogging solution (resin, paint, etc.)
ENGLISH

DELIVERY CONDITION

USE
6