OHAUS ISRK04HDG Manual De Instrucciones página 5

F.
E.
J.
D.
i r /W c
ncUbating ocker aver
The front panel of the Incubating Rocker/Waver contains all the controls and displays
needed to operate the unit.
A. Standby button/standby indicator light: The standby indicator light will illuminate
when the unit is plugged in. The unit will be in standby mode. Press the standby
button to activate the temperature, speed/tilt and time functions. The standby
indicator light will shut off and the temperature, speed/tilt and time displays will
illuminate. Press the standby button again and the unit will once again be in
standby mode.
B. Temperature display: Displays the actual/set-point temperatures in conjunction
with the actual/set-point indicator lights. C. Up/down arrows for set-point control.
On/off button starts/stops the heat function. D. The heat indicator light will be
illuminated when the unit is heating.
E. Actual indicator light: Illuminates when the temperature displayed is the actual
temperature of the air in the chamber.
F. Set-point indicator light: Illuminates when the set-point temperature is displayed.
G. B. L. M. H.
C. K. I.
P
ontrol anel
N.
O.
A.
G. Caution hot indicator light: Illuminates when the air temperature of the chamber
is above 40°C (104°F).
H. Speed/tilt display: Displays the speed and tilt of the unit. I. Up/down arrows for
set-point control. On/off button starts/stops the rocking/waving function. J. The
speed/tilt indicator light will be illuminated when the unit is rocking/waving.
K. Function button: Press to choose the function you are setting: speed or tilt.
L. Speed indicator light: Illuminates when the speed is displayed.
M. Tilt indicator light: Illuminates when the tilt angel is displayed.
N. Time display: Displays accumulated time (continuous mode) or how much time
is remaining (timed mode). O. Up/down arrows for set-point control. On/off button
starts/stops the time function. The display range is from 0 to 9999 minutes in one
(1) second increments. The display will indicate minutes and seconds until the timer
reaches 99 minutes and 59 seconds (99:59), then the display will automatically
display minutes up to 9999.
EN
4