Description And Applications Of The Equipment - Tractel DL Serie Instrucciones De Uso

DESCRIPTION AND APPLICATIONS OF THE EQUIPMENT

The Lyon's rope blocks permits lifting or deviation, without height or distance limits (these limits depend only
on the length of the rope / wire-rope)
The Lyon's blocks are composed in two parts :
·
An upper block, equipped with a becket and destined to be
installed on a anchoring point (fixed or mobile)
·
A lower block on which the load to be lifted or deviated is
installed
These 2 parts, assembled on a rope, constitute together a device
which limits the work load.
·
The block's cast iron and nylon sheaves are rotation free.
·
The block's suspension is fitted with a swivel hook with
safety latch.
It is important to control if the anchoring point (fixed or mobile) of
the upper part of the block is safe and warrants that the device
cannot slip out of its hanging point (translation stop).
Manual applications: in accordance with standards, it must be used
by a single operator.
Mechanical resistance of the upper block's anchorage point must at
least correspond to the WLL of the block's upper suspension :
Ref.
D080L
D082L
D083L
D085L
D086L
D088L
D089L
D091L
D092L
M 6077 M
rev 4 – 03/02/2014
GB
WLL of the lifting
Sheave number
blocks (kg)
3
2 (nylon)
2 (fonte)
3 (nylon)
3 (fonte)
2 (nylon)
2 (fonte)
3 (nylon)
3 (fonte)
Upper
suspension on
anchorage
point
Upper
block
Lower
block
Hook to place
Load at the upper
suspension (kg)
125
160
160
250
250
320
320
500
500
Rope / Wire
rope
Work
fall
Becket
Safety latch
170
240
240
340
340
480
480
670
670
p. 11 / 20