Basic Operations; Beginning Playback - Pioneer DVJ-X1 Manual De Instrucciones

Basic Operations

Basic Operations
CUE
PLAY/
PAUSE

Beginning playback

The playback operation differs depending on the type of disc, the setting
of the rear panel mode select switch, and the setting of auto cue and
other functions.
When a CD is loaded
When the rear panel mode select switch (MODE NORMAL/DJ) is set
to "NORMAL", playback will begin automatically from the first track,
and when the final track ends, playback will stop. Special DJ functions
are not supported in this mode.
When the rear panel mode select switch (MODE NORMAL/DJ) is set
to the "DJ", if the auto cue function (see next section) is OFF, playback
will begin automatically from the first track, and when the final track
ends, playback will stop and the unit will enter standby. If the auto cue
function is set to ON, the player will cue to the cue point and the outer
rim of the CUE button will light, and the PLAY/PAUSE (6) button's
outer rim indicator will flash, indicating the player is in the standby mode.
When the PLAY/PAUSE (3/8) button is pressed, the player will skip
over the non-recorded portion of the indicated track and immediately
begin playback. When a single track ends, the player will cue to the next
playback point, the outer rim of the CUE button will light, and the PLAY/
PAUSE (3/8) button's outer rim indicator will flash, indicating the player
is in the standby mode. When the PLAY/PAUSE (6) button is pressed,
playback will begin from the next track.
When playing a CD-ROM disc recorded with MP3 files, playback will
begin automatically from the first track in the first folder on the disc;
when the final track of the folder ends, playback will stop and the unit
will enter standby.
¶ If a CD-ROM disc is inserted that has no MP3 files in its first session,
the "NO TRACK" indicator will be displayed and playback will not
begin.
32
En <DRB1390>
Buttons and controls with the
Buttons and controls with the
When a DVD is loaded
MODE
When a commercial DVD title is loaded, the initial default cautionary
NORMAL/DJ
warnings will be displayed first (these warning messages cannot be
skipped). When the DVD is recorded with a menu and automatic play-
back start has not been set, the menu will appear. The menu can also be
displayed by pressing the MENU button or the top menu (T.MENU) but-
ton. The menu allows the setting of audio and subtitle languages, and
the selection of special features on the disc.
T.MEMU
MENU
ENTER
When the rear panel mode select switch (MODE NORMAL/DJ) is set
to "NORMAL" and the disc has been set for automatic playback start
(or the menu's "Play" item has been selected), playback will begin. Spe-
cial DJ functions are not supported in this mode.
When the rear panel mode select switch (MODE NORMAL/DJ) is set
to "DJ" and auto cue function (see next item) is OFF, if the disc is set for
automatic playback start (or or the menu's "Play" item has been se-
lected), playback will begin. If the auto cue function is ON, the player will
automatically cue to the cue point, the outer rim of the CUE button will
light, and the PLAY/PAUSE (6) button's outer rim indicator will flash,
indicating the player is in the standby mode. When the PLAY/PAUSE
(6) button is pressed, the player will skip over the non-recorded por-
tion of the indicated chapter and immediately begin playback. When a
single chapter ends, the player will cue to the next playback point, the
outer rim of the CUE button will light, and the PLAY/PAUSE (6) but-
ton's outer rim indicator will flash, indicating the player is in the standby
mode. When the PLAY/PAUSE (6) button is pressed, the player will
begin playback of the next chapter.
¶ Some of the above operations may not be supported, depending on
mark are disabled when the mode select switch is set to NORMAL.
mark are disabled when the mode select switch is set to DJ.
EXAMPLE: Main Menu
1. Highlight clips
2. Chapter list
3. Previews
4. Subtitle settings
5. Audio settings
6. Play
Depending on the disc, the style, contents, and operation method
used in the menu may be different. Basic operations are performed
by using the cursor button's four sides (2/ 3/5/∞) to select options,
and by pressing the ENTER button to confirm the selection. For de-
tailed instructions on using a disc's menu, consult the operating guide
provided with the disc.
# DJ operations cannot be performed on the menu display.
the disc or the portion being played.