Descargar Imprimir esta página

Bosch BSG 8 Serie Instrucciones De Uso página 31

Ocultar thumbs Ver también para BSG 8 Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Changing the dust bags and filters
*
Cleaning the motor protection filter
The motor protection filter should be cleaned
regularly by knocking out the dirt and rinsing.
Open the dust bag compartment lid
Remove the motor protection filter from the
appliance in the direction of the arrow.
Separate the motor protection filter from the
Bionic filter / AirFresh System.*
Clean the motor protection filter by tapping it
out.
If it is very dirty, the motor protection filter
should be rinsed out. The filter must then be left
to dry for at least 24 hours.
Caution: the Bionic filter / AirFresh System must
!
not come into contact with water, as this will
impair the proper functioning of the filter.
After cleaning, place the Bionic filter / AirFresh
System onto the motor protection filter as
necessary and push both filters into the
appliance.
Close the dust bag compartment lid.
* Depending on equipment level
en
33

Publicidad

loading