JVC KD-R988BTS Manual De Instrucciones página 17

SiriusXM® Radio
(for KD-R988BTS)
TuneScan™
You can get a short preview of the songs that you have missed on each of
your SmartFavorites music channels or currently tuned music channel.
1
Press .
2
Press to select TUNE SCAN, then press
Scanning start for the first 6 seconds of the recorded music contents.
• To listen to the current song, press
unit continues playing the current song.
• To select the previous/next song, press
• To cancel scanning, press and hold
channel before you entered TuneScan.
SiriusXM settings
1
Press and hold .
2
Press to select an item (see the following table), then
press .
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
SIRIUS XM
CHANNEL LOCK To unlock settings:
1 Press
2 Press
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press
to stop scanning. The
.
. Playback returns to the
.
Default: XX
to select a number.
to move to the entry position.
to confirm.
CODE SET
.
LOCK SETTING
CHANNEL EDIT * 1
CHANNEL CLEAR *
1
TUNE START * 2
SIGNAL LEVEL
BUFFER USAGE
SXM RESET
* 1
Displayed only when [USER DEFINED] is selected.
*
2
Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later that supports
SmartFavorites.
1 Press
to enter [NEW CODE].
2 Press
to select a number.
3 Press
to move to the entry position.
4 Repeat steps 2 and 3 to enter a new 4-digit pass code.
5 Press
to confirm.
6 Repeat steps 2 to 5 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings
for next time.
MATURE CH: Selects the SiriusXM-defined lock setting. ;
USER DEFINED: Selects the individual channels the user wants to
lock. ; OFF: Cancels.
1 Press
to select a category, then press
.
2 Press to select a channel you want to lock, then
press .
"L" appears in front of the channel number.
3 Press and hold to exit.
YES: Clears all the locked channels. ; NO: Cancels.
ON: All qualified music channels in the SmartFavorites will start
playback from the beginning of the song. ; OFF: Cancels.
Shows the strength (NO SIGNAL/WEAK/GOOD/STRONG) of the
current received signal.
Shows the memory usage (0% to 100%) for Replay buffer.
YES: Resets stored channel and lock setting to default. ; NO: Cancels.
13
ENGLISH