JVC KD-R988BTS Manual De Instrucciones página 38

INSTALLATION/CONNECTION
Installing the unit (in-dash mounting)
Orientate the trim plate as
illustrated before fitting.
When installing without the mounting
sleeve
1 Remove the mounting sleeve and trim plate from
the unit.
2 Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with
screws (commercially available).
Use only the specified screws. Using wrong screws
might damage the unit.
34 34
ENGLISH
Do the required wiring.
( 35)
Hook on the top side
Bend the appropriate tabs to
hold the sleeve firmly in place.
How to remove the unit
Part list for installation
(A) Faceplate
(C) Mounting sleeve
Dashboard of
your car
(E) Extraction key
Output terminals
For 2-way crossover setting
KD-R988BTS REAR
KD-R888BT
For 3-way crossover setting
KD-R988BTS REAR
KD-R888BT
(B) Trim plate
(D) Wiring harness
: Rear output
FRONT : Front output
SW : Subwoofer output
FRONT : Front output
REAR/SW : Rear/subwoofer output
: Tweeter output
FRONT : Mid Range output
SW : Woofer output
FRONT : Mid Range output
REAR/SW : Woofer output