Cleaning And Maintenance - Peg-Perego BOOK BOARD Manual De Instrucciones

_ Press both safety buttons (Fig_b1) and lift the
footboard (Fig_b2).
_ Press both buttons placed under the footboard and
lower it fully (Fig_c).
_ The wheels may be removed (Fig_d) and stored in
special slots (Fig_e).
10 To return to the position of use:
_ Refasten the wheels, if removed.
_ Raise the footboard upwards until it clicks (Fig_a).
_ Press the two safety buttons and lower the footboard
(Fig_b).
_ To fasten the footboard properly, lift the frame until it
clicks (Fig_c).
_ To ensure the footboard has engaged properly, check
for the color green on the buttons (Fig_d).
11 The two extensions supplied are used to lengthen the
handlebar and give more room to the passenger on
the footboard:
_ release the handlebar from the frame by pressing the
two inside buttons (Fig_a);
_ slide the two extensions into the handlebar until they
click into place, making sure the one marked DX is on
the right hand side and the one marked SX is on the
left, as shown (Fig_b);
_ slide the handlebar with extensions into the frame
until it clicks into place (Fig_c).
12 CLOSING the frame with the extended handlebar: the
frame is ONLY freestanding when the handlebar is
positioned as shown (Fig_a). For stowage in the trunk
of the car, the handlebar should be adjusted as shown
(Fig_b).
13 Permitted configurations:
(a) With the seated facing the world; in this case, the
stroller's backrest must be vertical to provide greater
space to the second passenger.
(b) With the seated facing mom.
(c) With the car seat facing mom.

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING: periodically clean all plastic parts with a
damp cloth. Do not use solvent or similar cleaning
products; keep all metal parts dry to prevent rusting;
keep moving parts clean (adjustment mechanisms,
locking mechanisms, wheels, ...) and free of dust and
sand and, if necessary, lubricate with light machine oil.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001 certified
company. This certification is a guarantee
for customers and consumers of the
transparency and trustworthiness of the
company's procedures and working
methods.
Peg Pérego can make changes at any time to the
models described in this publication for technical or
commercial reasons.
Peg Pérego is at the disposal of its customers and
consumers to ensure that all their demands and queries
are fully satisfied. It is a key part of our policy to ensure
we are always aware of our customers' views and
requirements. We would therefore be very grateful if,
after using a Peg Pérego product, you take the time to
fill in our CUSTOMER SATISFACTION QUESTIONNAIRE,
making a note of any comments or suggestions you
might have. You can find the questionnaire on the Peg
Pérego website: www.pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of your Peg Pérego product should be
accidentally mislaid or damaged, use exclusively
genuine original Peg Pérego replacements. For any
repairs, replacements, product information, and orders
for genuine original replacement parts and accessories,
please contact Peg Perego After Sales Service indicating
the product serial number, if any.
tel. 0039/039/60.88.213
e-mail assistenza@pegperego.it
website www.pegperego.com
- 8 -
fax 0039/039/33.09.992