Zibro Kamin RS 145 E Instrucciones De Uso página 50

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
1 1 1 1
1 1 3 3 a a
1 1 4 4 a a
1 1 4 4 b b
1 1 5 5 a a
1 1 5 5 c c
1 1 6 6 a a
1 1 6 6 b b
11
Put the wick holder and the wick mechanism back into
1 1 2 2
position.
12
Screw the four wing nuts hand tight.
13
Place the knurled wick adjustment knob on the wick
mechanism. Turn the knob as far to the right as
possible. Press the off switch. Check that the wick can
1 1 3 3 b b
be lowered completely. Repeat this check a number of
times. If the wick cannot be lowered completely it has
not been placed correctly. If this is the case, repeat the
procedure from 11.
14
Remove the knurled wick adjustment knob and adjust
the wick position to 1.
15
Put the cabinet back into position and tighten the three
screws. Put the knurled adjustment knob back into
position. Now put the combustion chamber back into
position. Check that it is level by sliding it slightly to the
left and the right by its handle. Close the grill.
1 1 5 5 b b
16
Put the filled removable tank back into position. Put
the batteries into the battery holder (ensure that the
positive and negative poles match the + and – marks
indicated on the battery housing). Wait 30 minutes
after replacing the tank and batteries before using the
heater.
1 1 5 5 d d
4
49
RS 145 E

Publicidad

Tabla de contenido
loading

Tabla de contenido